|
FEATURES AND BENEFITS:
The Dillon AP Mechanical Dynamometer exhibits limitless
versatility as a tension, traction and weight measuring
instrument.
Full selection of capacities--
Available in capacities from 500 to 100,000 pounds, 200 to
50,000 kilograms, 2,000 to 500,000 Newtons.
Long life--
The core of the device is a steel flexing beam. The enclosure
is a heavy aluminum alloy case with baked on protective
finish. The dial face is sealed and cushioned with a rubber
gasket.
Safe for overhead applications--
Most models have a 5:1 ultimate safety factor.
Zero control--
Use it like a tare. It can cancel preset load values up to 20%
of device capacity. |
|
SPECIFICATIONS
Accuracy: + 0.5% of capacity Temperature
range: -50° to 140° F (-45° to 60° C)
Ultimate Safety Factor:
See table on cover for minimum USF
Construction:
Pressure bar -
Aircraft quality E4340 steel or 7075-T651
aluminum
Shackles -
A4140 forged steel (machined from E4340
steel)
Shackle pins -
Machined from E4340 steel
Case housing:
5� models are equipped with high strength composite
plastic case.
10� models use cast aluminum enclosure.
Corrosion protection: Pressure bar
protected with durable powder coat paint. Shackles
and pins are electroless nickel plated. All integral
machining and fasteners are produced from
noncorrosive materials or have suitable plating.
Zero control: Zero up to 20% of capacity.
Zeroed load must be considered as part of ultimate
load.
Calibration: Traceable to NIST.
Documentation: Includes User’s Guide and
signed calibration card.
Carry case/crate:
Low/Med capacity 5" dial - includes plastic carry
case
Low/Med capacity 10" dial - optional steel carry
case
All high capacity - includes reinforced plywood
crate
Periodic proof loads: Controlled 150%
proof loads permitted annually.
|
|
|
|
&
Purchase Orders (with approved