Dynamometer Specifications
Enclosure: Designed to NEMA4X/IP55. Suitable for
continuous outdoor use.
Accuracy: 0.1% of capacity.*
Repeatability: 0.1% of capacity. 1 part in 1000 display
mode with Dillon provided shackles.
Body Protection: Aluminum capacities are anodized. Alloy
steel capacities are electrolysis-nickel plated.
Bearings: Unmatched repeatability attained by needle
bearings in shackle pin holes up to EDx-10K. Shackle pin
acts as inner race.
Shackles: Forged industry standard anchor shackles.
Models up to EDx-10K use precision machined shackle pin.
Higher capacities use forged pin.
Display: 128 x 64 dot-graphic LCD display shows up to 6
digits 1.0� (26 mm) high plus annunciators and softkeys.
Digits are .11 inches (7mm) thick for unmatched readability.
Display update rate: 2 times per second.
Connector: Recessed sealed connector may be used for
serial communications or connection to a Communicator
remote.
RS-232 / RS-485 communication: Print or extract data
easily. Continuous output can drive a scoreboard.
Configurable poll character.
Calibration: Traceable to the National Institute of
Standards and Technology. Certificate included with curve of
readings. Passes only with three consecutive confirming
runs, with all points in specification.
Battery life: 320 hours typical use with two C-cell
alkaline batteries. 40 hours typical with Radio Link system.
Operating temperature: -4° F to 140° F (-20° to 60° C)
Included with instrument: Carry case, batteries, manual and
certificate of calibration. EDx-50K and EDx-100K with
shackles include shackle crate and spacers.
Options: Shackles. 2.4 GHz radio board. Display
backlight.
&
Purchase Orders (with approved