|
FEATURES AND BENEFITS:
Force gauges calibrated in push-pull are available in seven
capacities in lb ranging from 50-0-50 to 5,000-0-5,000 and four
metric capacities from 50-0-50 to 1,000-0-1,000 kg. Newton
calibration is also available. Accuracy is ±2% of maximum dial
reading (based on total capacity of both compression and tension
scales). Model X-PP gauges in capacities up to and including
1,000-0-1,000 lb or 500-0-500 kg are supplied with a set of
self-aligning spherical rod-end connectors for tension loading.
Force is applied to connectors through a hardened steel pin which
must be a slip fit in connector holes. 2,500-0-2,500 lb and
5,000-0-5,000 lb and 1,000-0-1,000 kg capacity gauges are equipped
with two shackle adapters, shackles and pins. Shackles must be
removed when compression load is involved. Force is then applied
against shackle pins in a suitable test setup. All push-pull gauges
are supplied with a compression-loading spherical ball fitting for
compression loading.
|
|
&
Purchase Orders (with approved