|
|||||||||||||||||||
| IDS DT-200 DATA ACQUISITION TERMINAL |
The DT200 is the next generation data terminal designed to bring plug in enhancement features to indicators, balances and other basic instruments. This versatile and cost-effective terminal supports many indicators and provides standard features that enable it to interface with many devices including ticket, tape, bar code label printers, scanners, remote displays, solid-state relays, computers and virtually anything that has a serial port. The compact design of the DT200 combines flexibility and speed with easy-to-use operator interface that incorporates a bright vacuum fluorescent display and full numeric keyboard with large keys to facilitate data entry and operator prompting.
The DT200 is fully programmable in an easy and flexible macro language called Scale Basic. In addition to the built-in modes of operation, Scale Basic allows you to customize the operation of the DT200 to meet your application requirements. The Scale Basic language provides various commands and functions that include: math operations, I/O control, setpoints, timers, data entry, ID storage, message display, and program sequence control among others. Programming the DT200 can be performed through the keyboard or a PC using the optional EZ-LINK software that greatly facilitates setup and programming. The compact, solid-state Model DT200 fits important applications in
transportation, agriculture, mining, construction, material handling,
packaging and manufacturing. Password protection provides security against unauthorized access to data or tampering. The dome switch design of the keyboard provides better tactile feedback than membrane switches, and is immune to dust and liquid spills. Software customization is available to fit specific applications or interface requirements. STANDARD BUILT IN MODES OF OPERATION MODE 0 - Basic gross, tare and net weighingMODE 1 - Fill to Setpoint, Single setpoint fill with relay output control and weight print MODE 2 - Over/Under Checkweigh, Provides 3 TTL outputs and 2 setpoints to indicate over, under and between weight conditions. Outputs can activate lights or alarms MODE 3 - Vehicle Weigh-In/Out with Totals, Weigh-In/Out program for up to 500 vehicles; Maintains running totals for each vehicle; Provides reporting functions MODE 4 - Multi-Container/Axle Auto Weighing, Auto weighs and prints each weight placed on the scale; Each weight is sequentially numbered and accumulated; The total can be printed manually or automatically; Provides traffic light control MODE 5 - Auto Axle Weigh (Long Scales), Same as Mode 4 but previous axles are auto tared MODE 6 - ID Tare, Print and Total, Provides tare entry and recall by ID; Prints ID, sequence # and GTN weights; Keeps running totals by ID; Provides reporting functions, reports may be printed by a printer, transmitted to a host computer or may be requested by a remote PC.
8 digit vacuum fluorescent display (VFD) 0.5" (12.5 mm). 19-key sealed membrane with audible and tactile feedback. 8 selectable modes of operation. Programmable in Scale Basic macro language for application development (event driven). Provides built-in interfaces for a wide variety of indicators. Simulates A&D, Condec, Weigh-Tronix and Ohaus communication protocols; Provides user configurable protocol. Password protection to prevent unauthorized tampering. Built in diagnostic functions for memory, display and I/O ports. Primary and secondary units with conversion factor. Digital/Parallel port for relay control or Centronics printer interface. 3 full duplex serial ports: RS232, RS485 and 20mA current loop. Selectable baud rates (150 - 19.2K) and data formats. Barcode scanner/reader input interface. Time and Date Clock Y2K and Leap Year compliant. 32K non-volatile RAM provides 500 ID storage (part, truck, etc.). Selectable address for multi-drop RS485 network interface. Power: 115 VAC ±10%, 50/60 Hz, or 240 VAC ±10%, 50/60Hz. or 12 to 28 VDC. Power Consumption operating: 4 watts @ 115 VAC. Environmental: 32 F to 115 F (-10 C to 40 C), to 80%
non-condensing relative humidity. No external ventilation required. Size: 10.55" wide, 14" deep, and 6.25" high (26.80 x 35.56 x 15.87 cm). Weight: 2.7 lbs (1.22 kg). Enclosure Construction: Plastic ABS 94HB in Bone color. Dimensions: 10"x 4"x 8". Warranty: One year limited. AVAILABLE OPTIONS Analog Output Module: Fully Isolated 0-10 VDC or 4-20; 16 bit resolution. Relay Module: 4 to 8 channel external optically isolated relay module. EZ-LINK Software:PC software; facilitates configuration and Scale Basic programming. Custom Programming: Consult factory.
|
&
Purchase Orders (with approved