“MPR-series” MECHANICAL TRUCK SCALE

                                            PIT TYPE, CONCRETE DECK

Quality Products at Competitive Prices and USA made

Corner assembly rollers protect against traffic in both directions

“MPR-series” Mechanical 70’x10’- 60 ton TRUCK SCALE Specification include:

• Pit scale - Extra Heavy Duty Truck Scale prepared for concrete deck

• Overall height 42" inches - Length 70 feet – Width 10 feet

• 4-Section (4 main levers), 3 understructure modules

• Torque tube connection pipe

• Short transverse lever arm structure with stand prepared for load cell

• Truck scale capacity is 60 ton gross capacity - 70,000 lb dual axle capacity

• Roller mechanisms are used in each corner to provide the system with movement that prevents shock damage to the scale corner assemblies.  The “MRP-Series” scales are protected from side loading as well as end on movement.

• Concrete deck is typically 6" thick, optional 8" thick deck is available - it is poured in as a single monolithic structure.

• The deck is supported by two massive main beams (24"-76lb) with multiple cross member supports.  Understructure modules are rigidly connected.

• NTEP approved and certified as a Legal for Trade Vehicle Scale

• Main levers are designed for exceptionally long life cycles.

• SMA (Scale Manufacturers Association) standards are still utilized for pivot and bearing sizing.  The larger size of the components used reduces the wear and tear on the pivots and bearings in the field.

• A single NTEP approved load cell is isolated from transient damage through a simple shackle arrangement.

• Mechanical scales are configured for use with an electronic instrument.

• Bumper plates embedded in the pit coping approach are all the checking needed with these scales.  There are no check-rods to bind.

• There are two (2) manholes provided for pit access (1 manhole in axle scales).

• WARRANTY is 10-years on the weighbridge and 2-years on the load cell (see Warranty sheet for specific details).  Wearing parts are not included in the warranty.

OPTIONAL ITEMS:

Indicator                                                                                    Printer

Additional load cell cable                                                            Additional sets of certified prints

T-Stripping                                                                                 Specialty paints and processing

Pipe Bollards (6” diameter)                                                           

Call us for any other special requirements  

 Tel: 812-238-8883

Fax: 812-238-8853